Clinical equipment
Reichert Lenschek Advanced Logic Lensometer Model: 12621/230 Printer model: 12622
--------------
Melles Griot stand
---------
Optical table
--------
Melles Griot 17NTT001 Nanotrak
-----------
Melles Griot Piezoelectric driver 17PCS001
--------
ICOM communication receiver IC-R7100
--------
IFR COM-120B
----------
HP4948A in-service transmission impairment measuring set Opt 006
----------
Wandel & Goltermann PMG-13 (M-0065)
Pegel-Messgerat 20Hz….20KHz level measuring set
--------
HP 4263A LCR meter
--------
HP 3314A function generator
---------
Fluke 8506A Thermal RMS digital multimeter
--------
HP3325A Synthesizer/function generator
--------
HP E6392A upgraded to E6392B GSM Test set with E6392U Opt 101 Rev: B.03.00
----------
Fireberd 4000 Options 4004/6089 with V.35-306 DTE/DCE interface adaptor
-----------
|
41421B |
Source/monitor unit 40uV-100C/20fA |
|
41424A |
V source/V monitor |
Agilent/HP 75000 series C
|
E1095A |
Line conditioning unit – complies with VXIbus system specification, Rev 1.4 |
|
E1403C/E1328A |
4-channel D/A converter |
|
E1406A |
Command module |
|
E1413-66211 |
SCP cover 64-channel scanning A/D |
|
E1416A |
Power meter |
|
E1429B |
20 MSa/s 2-channel |
|
E1430A |
10 MSa/s ADC + Filter + FIFO-complies with VXIbus system specification, Rev 1.4 |
|
E1445A |
Arbitrary function generator -omplies with VXIbus system specification, Rev 2.0 |
|
E1450A |
160MHz timing module- complies with VXIbus system specification, Rev 1.4 |
|
E1451A |
20MHz Pattern I/O module-complies with VXIbus system specification, Rev 2.0 |
|
E1458A |
96-channel digital I/O- complies with VXIbus system specification, Rev 1.4 |
|
E1463A |
32-channel 5AMP form-C switch module |
|
E1466A |
256 crosspoint matrix |
|
E1472A |
50Ω RF multiplexer |
|
E1481A |
8/16 multiple channel D/A converter-complies with VXIbus system specification, Rev 1.4 |
|
E1482B |
VXI-MXI interface module-complies with VXIbus system specification, Rev 1.3 |
|
E1485A opt. ANS |
Signal processor- complies with VXIbus system specification, Rev 1.4 |
|
E1485C |
Signal processor - complies with VXIbus system specification, Rev 1.4 |
|
E1740A |
Time interval analyzer |
|
V743 |
32 Mbyte Controller - complies withVXIbus system specification, Rev 1.4 |
|
VX462B |
Pulse generator |
|
Z2468A |
32-channel 5AMP mosfet switch module-complies withVXIbus system specification, Rev 1.4 |
Agilent/HP 75000
| E1619B | 25.6 Mb/s (4B5B) line interface |
| E1697A | 155 Mb/s optical line interface |
| E4208D | HP Broadband series SCSI disk module |
| E4209B | HP Broadband series cell protocol processor |
| E4219A | HP Broadband series network impairment emulator |
---------
HP E1401B High power mainframe
--------
HP8168F Tunable laser source opt. 003
Agilent / HP 8168F is a high performance tunable laser source for the characterization of optical devices over wavelength. Independent control of the instrument parameters ensures that the output power is kept stable over time and wavelength. In manufacturing applications, it can be integrated into a fully-automated production test environment for precise, fast, and repeatable testing. In a manual setup, single or dual channel passive component measurements can be performed using the built-in application and an Agilent 8153A lightwave multimeter.
Features
- Built-in VOA (variable optical attenuator)
- Wavelength range: 1450 nm - 1590 nm
- Wavelength accuracy: ±0.04 nm
- Wavelength resolution: 0.001 nm
- Wavelength stability: < ±100 MHz
- Output power up to 7 dBm
- Side mode suppression ratio: > 50 dB
- Linewidth: 100 kHz
- GPIB and RS-232 remote interface
-----------
Wavetek 9100 with option 100:25 and detron 9105
-----------
Contact me at victor@metrologygauge.com , if you need others equipment that is not listed just send me an email.